Flywoo GOKU GN F411 AIO 6S 40A BLHeli_32

Multirotors → FPV Racing drones → Flight controllers → F4 FCs → FC F4 AIO built-in ESC 4in1 → Flywoo GOKU GN F4 6S 20A AIO BLHeli_32 → Flywoo GOKU GN F411 AIO 6S 40A BLHeli_32

MCU:	F411
Gyro:	MPU6000
Barometer:	-
Power :	2-6S
3.3V BEC:	0.5A
5V BEC:	2.0A
9V/10V BEC:	1.5A
Current Sensor:	+
ESC type:	built in
ESC:	4x40A
BLHeli:	BLHeli_32
UART Rx:	2+2
UART Tx:	2+2
Buzzer pad:	+
LED pad:	+
Blackbox:	8Mb
USB:	Micro USB
Size:	33.5x33.5mm
Mount Holes:	25.5x26.5mm
Weight:	8.5g

The FLYWOO new top GOKU series AIO is finally here! The GOKU GNF411 FC is an economical and durable all-in-one (AIO) FC that features STM32F411 MCU, MPU6000 (SPI) IMU, 2 hardware UARTS, and much more to meet your FPV needs!

Specifications

GN411AIO BLHELI_32 40A

MCU: STM32F411
IMU: MPU6000 (SPI)
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
2 hardware UARTS (UART1,2)
2 Software serial port/Support ESC telemetry
Onboard LED：WS2812*4
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onboard 8Mbytes for Blackbox logging
9V Power Out: 1.5A max
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 33.5x33.5mm
Mounting Holes: Standard 25.5/26.5mm square to the center of holes
Weight: 8.5g

Built-in 20A/40A BL_32 4in1 ESC

Support BLheli / BLHELI_32
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, Dshot1200
Input Voltage: 2-6S Lipo
Continuous Current: 40A
Firmware: BLHELI_32

Recommended (Not Included)

VTX : GOKU HM600 600MW VTX

Diagram

Includes

1 x Flywoo GNF411 F4 40A AIO BLHeli32 Flight Controller

Prices for Flywoo GOKU GN F411 AIO 6S 40A BLHeli_32 in stores

Deals found: 2 (NewBeeDrone¹)

Store	Stock level	Lot price	Shipping cost	Coupon / promocode	Pcs./lot	1pc price
NewBeeDrone	Out of stock	$54			1	$54