Join to our channels: new products, coupons, best deals:
Racing Drone Video TX
EWRF e7082VM 5.8GHz 100mW
Multirotors → FPV Racing drones → FPV drone electronics → Racing Drone Video TX → <200mW VTX → EWRF e7082VM 5.8GHz 100mW
EWRF e7082VM 5.8G 40CH 100mW Power Adjustable FPV Transmitter W/ Betaflight Cleanflight OSD
Description:
Item number: EWRF e7082VM
Frequency (Mhz)
Description:
Item number: EWRF e7082VM
Frequency: 5.8G 40CH
Transmitting Power: 100mw/OFF(Pitmode)
Power supply: DC5V
Current(5v): 170mA(100mW)
Weight: 1.4g
Standard size: 14*15*3mm
Main Features:
* Betaflight/Cleanflight OSD configuring parameter
* Clean powerup and channel switching without interference to others
* Smaller current: 100mw(5V power supply: 170mA)
User Guide
1. LED indication
* The red LED indicates the state of working mode or the item when setting the VTX(flashing 1 time means selecting the channels, flashing 2 times means selecting the bands).
* The blue LED indicates the state of Pitmode or the value of item when setting the VTX ( e.g. when selecting the channels, 1 times of flashing means channel 3. When selecting the bands, 1 times of flashing means band A.)
* The green LED flashing indicates that the VTX overheat protection is working, the power level will go down.
2. Working mode indication
* After powering up, the red & blue LEDs will signal the following two items of VTX in turn: channel, band (the flashing times of the red and blue LEDs indicate the item and the value respectively). After that, the LEDs indicate the working modes.
* Normal: The red & blue LED are on.
* Pitmode:The red LED is on and blue LED is off.
3. Setting
* The red LED flash 1 time which means the item of channel selecting, then press the button can select the channels(blue LED flashing times corresponds to the channel 1-8).
* The red LED will flash 2 times which means the item of band selecting, then press the button can select the band(blue LED flashing times corresponds to the band A-F).
For e7082VM, Betaflight/Cleanflight OSD setting of channel,band and Pitmode ,please referring to 'Betaflight OSD setting of EWRF Transmitter' for details.
Frequency (Mhz)
| Band | CH1 | CH2 | CH3 | CH4 | CH 5 | CH6 | CH7 | CH8 |
| A | 5865 | 5845 | 5825 | 5805 | 5785 | 5765 | 5745 | 5725 |
| b | 5733 | 5752 | 5771 | 5790 | 5809 | 5828 | 5847 | 5866 |
| c | 5705 | 5685 | 5665 | 5645 | 5885 | 5905 | 5925 | 5945 |
| d | 5740 | 5760 | 5780 | 5800 | 5820 | 5840 | 5860 | 5880 |
| E | 5658 | 5695 | 5732 | 5769 | 5806 | 5843 | 5880 | 5917 |
Note:
1. Make sure that there is enough space for airflow when installing the module on the drone in case the overheating protection starts to reduce the power even to shut down at the worst.
2. Please install the antenna before powering up for a longer use life.
1. Make sure that there is enough space for airflow when installing the module on the drone in case the overheating protection starts to reduce the power even to shut down at the worst.
2. Please install the antenna before powering up for a longer use life.
Share
Prices for EWRF e7082VM 5.8GHz 100mW in stores
Deals found: 113 ()
See also
EWRF e7082VM 5.8G 40CH 100mW + 600TVL CMOS Camera
$41
Join to our channels: new products, coupons, best deals: