Rover 5 Tracked Robot Chassis Without Encoder

Description

The Rover 5 is a new breed of tracked robot chassis designed specifically for students and hobbyist. Unlike conventional tracked chassis's the clearance can be adjusted by rotating the gearboxes in 5-degree increments. “Stretchy” rubber treads maintain tension as the clearance is raised.

This robot chassis is designed to carry a PCB board of your choice and can be outfitted with any components that you choose. The possibilities are only limited by your imagination.

*Note: This version includes two motors and No encoders.

Features:
• All-terrain "stretchy" rubber tracks
• Rotating gearboxes adjustable in 5-degree increments
• Arrives pre-assembled

Specs:
Length: 235mm (As in photo)
Height: 90mm (As in photo)
Width: 220mm 
Motor rated voltage: 7.2V
Motor stall current: 2.5A
Output shaft stall torque: 10Kg/cm
Gearbox ratio: 86.8:1
Speed: 1Km/hr

Length: 235mm (As in photo)
Height: 90mm (As in photo)
Width: 220mm 
Motor rated voltage: 7.2V
Motor stall current: 2.5A
Output shaft stall torque: 10Kg/cm
Gearbox ratio: 86.8:1
Speed: 1Km/hr