Mini DLG Composite Discus Launch Glider - Yellow 950mm (PNF) (AR Warehouse)

Description

The Mini DLG is a brilliant model perfect for those looking to get into DLG gliders without the hassle and expense of building a traditional kit! Small in size, excellent construction quality and a high level of pre-assembly, all at a price that can't be beat!

The carbon reinforced wing is built from balsa and covered in ultra-light film, as are the horizontal and vertical stabs. The boom is constructed of carbon fiber while the detachable fuselage pod is made from a combination of light ply and plastic. All this combined makes for an ultra-light model with excellent flight performance!

The Mini DLG arrives with the wing, fuselage and tail sections pre-assembled, as well as the servos, pushrods and control horns all pre-fitted. After opening the box, you will simply need to bolt on the wing, the horizontal stab and install your own receiver/battery.

Features:
• Excellent build quality
• High level of pre-assembly
• Ultra-light balsa and carbon fiber construction
• One piece bolt-on wing and horizontal stabilizer
• Servos, pushrods and control horns pre-fitted

Specs:
Wingspan: 950mm
Length: 750mm
Wing Area: 11.16dm²
Wing Loading: 11.6g/dm²
Flying Weight: 130g (can add ballast weight for windier days)
Servo: 2 x 3.6g micro (included)

Included in box:
Mini DLG Glider
User manual/setup guide

Required:
Minimum 2CH transmitter and receiver (micro receiver recommended)
4.8~6V receiver battery (less than 25g recommended)
UBEC/Voltage regulator (if using 2S lipoly receiver battery)

*Note: Receiver battery output voltage must not exceed 6V if running directly to receiver without a UBEC/VR, otherwise damage to servos may occur.